Manual

Cisco Systems, Inc. Page 123
123
Appendix B
Minimum number of directory numbers
required: 2.
Step 4
number number [secondary number]
[no-reg [both | primary]]
Example:
Router(config-ephone-dn)# number
6789
Associates a telephone or extension number with
an ephone-dn in a Cisco Unified CME system.
Each DN for a conference must have the
same primary and secondary number.
Step 5
conference ad-hoc
or
conference meetme
Example:
Router(config-ephone-dn)#
conference ad-hoc
or
Router(config-ephone-dn)#
conference meetme
Configures a number as a placeholder for ad hoc
conferencing to associate the call with the DSP
farm.
or
(Optional) Associates meet-me conferencing with
a directory number.
Step 6
preference preference-order
[secondary secondary-order]
Example:
Router(config-ephone-dn)#
preference 1
Sets dial-peer preference order for an extension
(ephone-dn) associated with a Cisco Unified IP
phone.
Remember to configure "preference x" with
low value to last DN.
The lower the value of the preference-order
argument, the higher the preference of the
extension.
Step 7
no huntstop [channel]
Example:
Router(config-ephone-dn)# no
huntstop
Continues call hunting behavior for an extension
(ephone-dn) or an extension channel.
Remember to configure no huntstop for all
DNs except the last one.
Step 8
end
Example:
Router(config-ephone-dn)# end
Exits to privileged EXEC mode.