Manual

Cisco Systems, Inc. Page 122
122
Cisco Unified CallConnector Mobility Service
Technical Overview
Router(config-telephony)# sdspfarm
conference mute-on 111 mute-off
222
numbers and symbols that appear on your
telephone keypad: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, *,
and #.
• Mute-on and mute-off digits can be the
same.
Step 8
end
Example:
Router(config-telephony)# end
Exits to privileged EXEC mode.
Configuring Multi-Party Ad Hoc Conferencing and Meet-Me Numbers
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ephone-dn dn-tag dual-line
Example:
Router(config)# ephone-dn 18 dual-
line
Enters ephone-dn configuration mode for the
purposes of creating and configuring an
extension (ephone-dn) for a Cisco Unified IP
phone line.
• Each ephone-dn can carry two parties if it is
configured as a dual line.
• Configure enough ephone-dns to
accommodate the maximum number of
conference participants to be supported.
• For multi-party ad hoc conferencing,
maximum number of directory numbers is 8, but
you can configure a lower maximum.
• For meet-me conferencing, maximum
number of directory numbers is 32, but you can
configure a lower maximum.