Manual

Cisco Systems, Inc. Page 120
120
Cisco Unified CallConnector Mobility Service
Technical Overview
Associating Cisco Unified CME with a DSP Farm Profile
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
sccp ccm group group-number
Example:
Router(config)# sccp ccm group 1
Creates a Cisco Unified CME group.
Step 4
associate ccm identifier-number priority
priority-number
Example:
Router(config-sccp-ccm)# associate ccm
100 priority 1
Associates a Cisco Unified CME router with
the group and establishes its priority within
the group.
Step 5
associate profile profile-identifier register
device-name
Example:
Router(config-sccp-ccm)# associate
profile 2 register confdsp1
Associates a DSP farm profile with the
Cisco Unified CME group.
• device-name is a maximum of 16
characters.
Note Repeat this step for every conferencing
DSP farm and transcoding DSP farm.
Step 6
end
Example:
Router(config-sccp-ccm)# end
Exits to privileged EXEC mode.