Manual

Cisco Systems, Inc. Page 118
118
Cisco Unified CallConnector Mobility Service
Technical Overview
Step 8
sccp
Example:
Router(config)# sccp
Enables SCCP and its related applications
(transcoding and conferencing).
Step 9
exit
Example:
Router(config)# exit
Exits global configuration mode.
Configuring the DSP Farm
To configure the DSP farm profile for multi-party ad hoc and meet-me conferencing, perform the
following steps.
Note: The DSP farm can be on the same router as the Cisco Unified CME or on a different router.
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
dspfarm profile profile-identifier
conference
Example:
Router(config)# dspfarm profile 1
conference
Enters DSP farm profile configuration mode and
defines a profile for DSP farm services.
Step 4
codec {codec-type | pass-through}
Example:
Router(config-dspfarm-profile)#
codec g711ulaw
Specifies the codecs supported by a DSP farm
profile.
Note Repeat this step as necessary to specify all
the supported codecs.
Step 5
conference-join custom-cptone
cptone-name
Example:
Associates a custom call-progress tone to indicate
joining a conference with a DSP farm profile.
Note The cptone-name argument in this step must
be the same as the cptone-argument in the voice