Manual

Cisco Systems, Inc. Page 117
117
Appendix B
Configuring SCCP for Cisco Unified CME
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
sccp local interface-type interface-
number [port port-number]
Example:
Router(config)# sccp local
FastEthernet0/0
Selects the local interface that SCCP
applications (transcoding and conferencing)
use to register with Cisco Unified CME.
Step 4
sccp ccm {ip-address | dns} identifier
identifier-number [priority priority] [port
port-number] [version version-number]
Example:
Router(config)# sccp ccm 1.4.158.3
identifier 100 version 4.0
Adds a Cisco Unified CME router to the list of
available servers and set various
parameters—including IP address or Domain
Name System (DNS) name, port number, and
version number.
• version-number—Must be 4.0 or later.
Step 5
sccp ccm group group-number
Example:
Router(config)# sccp ccm group 123
Creates a Cisco Unified CME group.
Step 6
bind interface interface-type interface-
number
Example:
Router(config-sccp-cm)# bind interface
fastethernet 0/0
Binds an interface to a Cisco Unified CME
group.
Step 7
exit
Example:
Router(config-sccp-cm)# exit
Exits SCCP Cisco Unified CME configuration
mode.