Administrator's Guide

6-20
Cisco Unified Attendant Console Administration and Installation Guide
OL-27293-02
Chapter 6 Configuring and Licensing Cisco Unified Attendant Console Advanced Server
System Configuration Menu
Copy all device properties
from this device
You can create a template CTI device with custom settings in
Cisco Unified Communications Manager, and use it as a
quick way of assigning these settings to your Cisco Unified
Attendant Console Advanced devices. If you do not have a
template, default values are assigned to your devices.
Click Find Template Device to search for a template.
Notes:
• The template device should be based on an end point (a
phone) or a CTI Port. Do not use a CTI Route Point as a
template device.
• If under Protocol Specific Information a Subscribe
Calling Search Space is configured, then under Device
Information an Owner User ID must also be configured,
otherwise an error occurs when you to synchronize the
CTI ports with Cisco Unified Communications
Manager. We recommend that you use the Application
User ID allocated for Cisco Unified Attendant Console
Advanced for the Owner User ID.
• If a template device is specified for a Queue DDI it must
outline the Calling Search Space (CSS) for the
following:
– Forward on CTI Failure
– Forward Unregistered Internal
– Forward Unregistered External
Set these within Cisco Unified Communications
Manager, under Directory Number Configuration >
Call Forward and Call Pickup Settings.
CT Gateway Devices
From The number of the first device in the range to configure. For
example 6301.
To The number of the last device in the range to configure. For
example 6302.
Service Devices
From The number of the first device in the range to configure. For
example 6401.
To The number of the last device in the range to configure. For
example 6402.
Park Devices
From The number of the first device in the range to configure. For
example 6501.
To The number of the last device in the range to configure. For
example 6502.
Field Description