Administrator's Guide

6-8
Cisco Unified Attendant Console Administration and Installation Guide
OL-27293-02
Chapter 6 Configuring and Licensing Cisco Unified Attendant Console Advanced Server
Engineering Menu
It is good practice to have a strong password that utilizes both numeric and alpha characters. The Cisco
Unified Attendant Console Advanced server allows up to a maximum of 20 characters including the use
of Special Characters such as%,$,£,&.
Step 4 Re-enter the new password in the Confirm New Password field.
Step 5 Click Save to save changes.
To set the password back to its default value, CISCO, click Reset Password.
Server Management
Note This Engineering menu is not available if you have a non-resilient installation.
The databases in the Publisher and Subscriber server machines contain a Server Details table.
If you have a resilience license, you can change some of these details using the Server Management
option.
To change server details:
Step 1 Choose Engineering > Server Management.
Step 2 The Server Management page is displayed.
Step 3 Under Server Details, select the server to manage.
Step 4 Enter the following values:
• Reconnection Delay (msecs)—reconnection delay in milliseconds. Default Value 90000. You must
enter a value.
• Buffer Duration (secs)—buffer duration in seconds. Default Value 259200. You must enter a value.
Step 5 Click Save to save the settings.
Database Management
The configuration database is created when you install the Cisco Unified Attendant Console Advanced
server. The Database Management option enables you to connect to the configuration database, to test
the connection and to repair the database.
Note If you have a resilient Cisco Unified Attendant Console Advanced installation, you cannot connect to a
different database. On a non-resilient installation you can connect to and use a different database, and
the page contains a Save button, which enables you to save the changed configuration.
To connect to the database:
Step 1 Choose Engineering > Database Management.