Administrator's Guide

3-8
Cisco Unified Attendant Console Administration and Installation Guide
OL-27293-02
Chapter 3 Hardware and Software Requirements
Cisco Unified Attendant Console Advanced Client Requirements
PC Hardware Requirements
The PC running the Cisco Unified Attendant Console Advanced client has the following hardware
requirements:
• 2.0 GHz Pentium 4 processor
• 1 GB RAM
• 1 GB of available hard disk space
• Network card, connected to the network using TCP/IP
• SVGA (1024x768) display card
• 17-inch or larger monitor highly recommended
• SoundBlaster-compatible sound card and speakers highly recommended
• Keyboard with 10-key number pad
PC Software Requirements
The PC running the Cisco Unified Attendant Console Advanced client must be running one of the
following activated operating systems:
• Microsoft Windows XP Professional Service Pack 3
• Microsoft Windows Vista Professional 32-bit
• Microsoft Windows Vista Professional 64-bit (using WoW64 emulation)
• Microsoft Windows 7 32-bit
• Microsoft Windows 7 64-bit (using WoW64 emulation)
• Microsoft Windows 8
• Microsoft Windows 8 Pro
• Microsoft Windows 8 Enterprise
Windows Updates and Service Packs
Cisco Unified Attendant Console Advanced client supports the application of all Microsoft Windows
Updates and Service Packs.
Java auto-updates are not supported because they sometimes fail, rendering the system unusable.
Operator Phone Requirements
If the operator is using a Cisco 7931 IP phone, maximum calls on the Cisco Unified Communications
Manager must be set to at least two.
If the operator is using a Cisco 89xx or 99xx IP phone, the rollover feature on Cisco Unified
Communications Manager must be disabled.
Note The following points: