Administrator's Guide

CHAPTER

2-1

Cisco Unified Attendant Console Administration and Installation Guide

OL-27293-02

Deployment Checklist

This section lists the things you must do to install Cisco Unified Attendant Console Advanced server and

Cisco Unified Attendant Console Advanced client for the first time. You may find it useful to print this

page and annotate it to keep track of your progress.

Note If you are upgrading an existing Cisco Unified Attendant Console Advanced installation, see

Appendix F, “Upgrading Cisco Unified Attendant Console Advanced”.

To install Cisco Unified Attendant Console Advanced for the first time perform the following steps:

1. Check that your Cisco Unified Communications Manager version is compatible with the version of

Cisco Unified Attendant Console Advanced you are installing. For more information, see

Integrating Cisco Unified Attendant Console Advanced with Cisco Unified Communications

Manager, page 1-6.

2. Decide whether the Cisco Unified Attendant Console Advanced server is going to run on a physical

server or in VMware, and confirm that your server meets or exceeds the minimum specifications

required by Cisco Unified Attendant Console Advanced. For more information, see:

–

Physical Server Hardware Requirements, page 3-1

–

VMware Server Requirements, page 3-5

3. Ensure that you have the correct versions of operating system and SQL database required by the

Cisco Unified Attendant Console Advanced server and client. For more information, see:

–

Physical Server Software Requirements, page 3-2

–

Additional Server Considerations, page 3-6

–

PC Software Requirements, page 3-8

4. Configure Cisco Unified Communications Manager so that it is ready for Cisco Unified Attendant

Console Advanced deployment. For more information, see: Chapter 4, “Preparing Cisco Unified

Communications Manager and Cisco Unified Presence”

5. Download, install and license the Cisco Unified Attendant Console Advanced software. For more

information, see Chapter 5, “Installing Cisco Unified Attendant Console Advanced Software”.

6. Use Cisco Unified Attendant Console Advanced Administration to configure the Cisco Unified

Attendant Console Advanced server. For more information, see Chapter 6, “Configuring and

Licensing Cisco Unified Attendant Console Advanced Server”.

7. Install the Cisco Unified Attendant Console Advanced client. For more Information, see Installing

Cisco Unified Attendant Console Advanced Client, page 5-11.