Administrator's Guide

1-6
Cisco Unified Attendant Console Administration and Installation Guide
OL-27293-02
Chapter 1 Product Overview
Integrating Cisco Unified Attendant Console Advanced with Cisco Unified Communications Manager
LDAP uses the following TCP/IP ports to communicate with Cisco Unified Communications Manager:
Integrating Cisco Unified Attendant Console Advanced with
Cisco Unified Communications Manager
Cisco Unified Attendant Console Advanced V10.0.1 is compatible with Cisco Unified Communications
Manager versions 7.1(5) to 10.0(1).
Note The 32-bit version of TSP is required when running Cisco Unified Attendant Console under a 32-bit
operating system. The 64-bit version of TSP is required when running Cisco Unified Attendant Console
under a 64-bit operating system. Consequently, 64-bit installations are supported only in conjunction
with Cisco Unified Communications Manager versions 8.5(1) to 10.0(1).
AXL Connectivity
The AVVID XML Layer (AXL) is used both during and after Cisco Unified Attendant Console
Advanced installation.
AXL Usage During Installation
During Cisco Unified Attendant Console Advanced server installation you have to specify the following
nodes:
11859 TCP Pub/Sub Internal Used by the Cisco Unified Attendant Console Advanced
service to communicate with the Cisco Unified Attendant
Console Advanced server.
61616 TCP Pub<->Sub Used to enable messages to be passed between Publisher and
Subscriber servers in resilient installations.
61618 TCP Pub<->Sub
* Relationship Key
CUCM = Cisco Unified Communications Manager
CUPS = Cisco Unified Presence server
Opr = Attendant Console Client
Pub = Publisher Server
Sub = Subscriber Server
TCP/IP Port Use
389 LDAP server does not use SSL and is not configured as the Global Catalog.
636 LDAP server uses SSL and is not configured as the Global Catalog.
3268 LDAP server does not use SSL and is configured as the Global Catalog.
3269 LDAP server uses SSL and is configured as the Global Catalog.
Port
Number
Port
Type Relationship * Function