Administrator's Guide

6-47
Cisco Unified Attendant Console Administration and Installation Guide
OL-27293-02
Chapter 6 Configuring and Licensing Cisco Unified Attendant Console Advanced Server
User Configuration Menu
• If the license has expired, or if there is no resilience license installed, you can only uninstall any
existing replication.
Note The following points:
• You must configure replication for both the ATTCFG and ATTLOG databases on both the Publisher
and the Subscriber. Configure the Publisher databases before configuring the Subscriber databases.
(the Subscriber communicates with the Publisher). When you have installed a Publisher or
Subscriber server you cannot convert it into the other type. The Publisher requires at least SQL
Server Standard to be installed, while the Subscriber can use SQL Server Express (which is installed
when you install Cisco Unified Attendant Console Advanced).
• The date, time and time zone on the Publisher and Subscriber machines must be the same, otherwise
Console users will not be notified that the Publisher has become available after recovering from a
failure, and will be unable to switch from the Subscriber back to the Publisher. One way to achieve
this is to synchronize the time of both servers with the same time server.
• The CT and LDAP servers on the Publisher and the CT server on the Subscriber are stopped when
you install, uninstall or re-initialize replication, and are started again afterwards.
Before you can configure Cisco Unified Replication, you must do the following:
Step 1 On the Publisher server, in Cisco Unified Attendant Console Advanced Administration, use the
Navigation control at the right-hand end of the banner to select Cisco Unified Replication and click Go.
The Cisco Unified Replication home page is displayed.
Step 2 Click Replication Management.
The Replication Management page is displayed. This lists the databases on the selected server:
• ATTCFG—the configuration database
• ATTLOG—the logging database
The Publication Name is a unique name used by SQL Server during replication. It has the format
<Server_Name>_<Database_Name>. A database with a Publication name (a publication) has replication
configured.
Step 3 Under Server Details, select the server to check or configure.
Step 4 Under Replication Management, click Select alongside the database to check or configure.
The Information for that database is displayed, below which are the following control buttons:
• Install Replication. For more information, see Installing Replication, page 6-48.
• Uninstall Replication. For more information, see Uninstalling Replication, page 6-50.
• Reinitialize Replication. For more information, see Re-initializing Replication, page 6-50.
• Monitor Replication. For more information, see Monitoring Replication, page 6-51.
• Validate Replication. For more information, see Validating Replication, page 6-51.
• Replication Report. For more information, see Replication Report, page 6-52.