Manual

DescriptionRequired Information
An identification for SS7 routing domain and must be an integer
between 1 and 12 by which the SS7 routing domain will be identified
and configured.
A variant can be configured for the SS7 routing domain. some of them
are:
•
ansi: American National Standards Institute (U.S.A.)
•
bici: Broadband Intercarrier Interface standard
•
china: Chinese standard
•
itu: International Telecommunication Union (ITU-T)
Telecommunication Standardization Sector
•
ntt: Japanese standard
•
ttc: Japanese standard
SS7 Routing Domain id and variant
A network indicator in the subservice field for SS7 message signal
units (MSUs).
It can be configured with any of the following indicators:
•
International
•
National
•
Reserved
•
Spare
Sub Service Field (SSF)
An M3UA Application Server Process (ASP) instance identified from
1 through 4.
This instance need to configure end point address as well.
Application Server Process (ASP)
instance
Specifies a peer server instance to setup a SIGTRAN peer for sending
and receiving M3UA traffic. Up to 49 peer servers can be defined.
A peer server id configuration may contain:
•
Routing context for peer server to use
•
Self point code in SS7 type address
•
Operational Mode
•
Peer Server Process (PSP) instance
Peer server id
HNB-GW Administration Guide, StarOS Release 19
84
HNB-GW Service Configuration Procedures
Required System-Level Configuration Information