Manual

With HNBGW Hybrid and ACL Phase I support HNBGW returns the membership status of the UE with

respect to the HNB in the UE Register accept message. Also max length of the list of IMSI (white-list)

representing the UEs that can register with an HNB is increased to 150 from 27.

Overview

This feature provides the UE a means to know its CSG membership status in case of hybrid mode HNB. It

also provides means for HNBs to have higher number of registered members and provides mechanism to

RMS to dynamically change the white-list of a particular HNB. Maximum number of 150 UE/members which

are part of the whitelist can register with an HNB now based on the 'max-registered-ue' and 'configured value'

because at a time the max number of UE that can be registered at HNBGW is a configurable parameter and

it can vary based on the configured value. So it is independent of the whitelist length. All the IMSIs part of

ACL of an HNB can be sent in multiple whitelist in the same Access accept by the Radius server. So HNBGW

shall be able to handle multiple IMSI whitelist received in Access accept or "change of authorization" message.

Limitations

There is a limitation on number of recovery record during sessmgr or hnbmgr recovery, as it is expected that

there will be increase in memory usages per HNB record, the limitation on number of recovery record may

change.

HNB-GW Administration Guide, StarOS Release 19

HNB Gateway in Wireless Network

Hybrid and ACL Phase I support