Manual

3-3
Cisco TEO Adapter Guide for SAP Solution Manager
OL-25939-01
Chapter 3 Managing Triggers
Creating Solution Manager Alert Trigger
Creating Solution Manager Alert Trigger
Use the Solution Manager Alert trigger to specify the properties in the monitoring tree element (MTE)
that must be matched before an alert is generated. When the specified alert is generated, the process is
executed.
Step 1 On the Definitions—Processes view, use one of the following methods to open the Process Editor:
• Select an existing process, right-click and choose Edit.
• Right-click Processes in the navigation pane and choose New > Process.
Step 2 On the Process Editor properties, click the Triggers tab.
Step 3 On the Triggers tab, click New > Solution Manager Alert.
Figure 3-2 Solution Manager Alert Properties—General Tab
Step 4 On the General tab, enter the following general information about the trigger:
Step 5 Click the Alert tab to specify the alert criteria.
Field Description
Display name Name of the trigger that displays in the Processes pane.
Type Display only. Type of trigger.
Description Text description of the trigger.
Enabled Check or uncheck the check box to enable or disable the
trigger. The check box is checked by default.
If you uncheck the check box, the trigger is disabled and
will be unavailable.