Manual
Table Of Contents
- Preface
- Introduction
- Process Summary
- Prerequisites
- Run the Service Setup Wizard
- VCS System Configuration
- Routing Configuration
- Pre-search Transforms
- Search Rules
- Task 8: Configuring Transforms
- Task 9: Configuring Local Zone Search Rules
- Task 10: Configuring the Traversal Zone
- Neighboring Between VCS Clusters
- Task 11: Configuring Traversal Zone Search Rules
- Task 12: Configuring the DNS Zone
- Task 13: Configuring DNS Zone Search Rules
- Task 14: Configuring External (Unknown) IP Address Routing
- Endpoint Registration
- System Checks
- Maintenance Routine
- Optional Configuration Tasks
- Appendix 1: Configuration Details
- Appendix 2: DNS Records
- Appendix 3: Firewall and NAT Settings
- Appendix 4: Advanced Network Deployments
- Obtaining Documentation and Submitting a Service Request
- Cisco Legal Information
- Cisco Trademark
6. Configure the fields as follows:
VCS Expressway
Rule name
Enter Block ISDN call for example
Description
Enter Blocks everything (including nonregistered endpoints)
Priority
Enter 41
Protocol Any
Source Any
Request must be
authenticated
No
Mode Alias pattern match
Pattern type Regex
Pattern string
Enter (9\d+)(.*)(@example.com)
Pattern behavior Replace
Replace string
Enter do-not-route-this-call for example
On successful match Stop
Target TraversalZone
State Enabled
49
Cisco VCS Expressway and VCS Control - Basic Configuration Deployment Guide
Optional Configuration Tasks