Manual
Table Of Contents
- Preface
- Introduction
- Process Summary
- Prerequisites
- Run the Service Setup Wizard
- VCS System Configuration
- Routing Configuration
- Pre-search Transforms
- Search Rules
- Task 8: Configuring Transforms
- Task 9: Configuring Local Zone Search Rules
- Task 10: Configuring the Traversal Zone
- Neighboring Between VCS Clusters
- Task 11: Configuring Traversal Zone Search Rules
- Task 12: Configuring the DNS Zone
- Task 13: Configuring DNS Zone Search Rules
- Task 14: Configuring External (Unknown) IP Address Routing
- Endpoint Registration
- System Checks
- Maintenance Routine
- Optional Configuration Tasks
- Appendix 1: Configuration Details
- Appendix 2: DNS Records
- Appendix 3: Firewall and NAT Settings
- Appendix 4: Advanced Network Deployments
- Obtaining Documentation and Submitting a Service Request
- Cisco Legal Information
- Cisco Trademark
5. Click New.
6. Configure the search rule fields as follows:
VCS Control VCS Expressway
Rule name
Enter Local zone – no domain
Same as VCS
Control
Description
Enter Search local zone for H.323 devices
(strip domain)
Priority
Enter 48
Protocol Any
Source Any
Request must be
authenticated
No
Mode Alias pattern match
Pattern type Regex
Pattern string
Enter (.+)@example\.com.*
Pattern behavior Replace
Replace string
Enter \1
On successful match Continue
Target LocalZone
State Enabled
26
Cisco VCS Expressway and VCS Control - Basic Configuration Deployment Guide
Routing Configuration