Manual
Table Of Contents
- Preface
- Introduction
- Process Summary
- Prerequisites
- Run the Service Setup Wizard
- VCS System Configuration
- Routing Configuration
- Pre-search Transforms
- Search Rules
- Task 8: Configuring Transforms
- Task 9: Configuring Local Zone Search Rules
- Task 10: Configuring the Traversal Zone
- Neighboring Between VCS Clusters
- Task 11: Configuring Traversal Zone Search Rules
- Task 12: Configuring the DNS Zone
- Task 13: Configuring DNS Zone Search Rules
- Task 14: Configuring External (Unknown) IP Address Routing
- Endpoint Registration
- System Checks
- Maintenance Routine
- Optional Configuration Tasks
- Appendix 1: Configuration Details
- Appendix 2: DNS Records
- Appendix 3: Firewall and NAT Settings
- Appendix 4: Advanced Network Deployments
- Obtaining Documentation and Submitting a Service Request
- Cisco Legal Information
- Cisco Trademark
Examples for Running the Service Setup Wizard
Example for VCS Registrar
1. Click VCS series.
2. Click VCS Control.
3. Check Registrar.
4. Check any other compatible services that you have bought for this system. For this example, let's assume
Business to business calls. (The matrix of compatible services is in the online help and the VCS Administrator
Guide.)
5. Click Continue.
The wizard takes you to the licensing and options page.
6. [If required] Paste the release key into the first text area.
7. Paste the VCS series key into the second text area (eg. 116341E00-1-AAAAAAAA).
8. Click Continue.
9. Review the networking configuration and click Continue.
10. Restart the system when prompted.
This completes the service setup and licensing for the VCS Control part of your desired outcome. However,
since we chose Business to business calls, we would have to run the wizard again to set up and license the
VCS Expressway, because the business to business calling deployment requires firewall traversal.
18
Cisco VCS Expressway and VCS Control - Basic Configuration Deployment Guide