Manual

Appendix 14 – Cisco VCS and Microsoft OCS Director
When used with Cisco VCS the OCS Director should be configured to be the receiver of calls from the
“OCS gateway” Cisco VCS and the source of calls from OCS to the “OCS gateway” Cisco VCS (see
configuration sections in the main part of this document).
When used with a Microsoft Edge Server, OCS Director proxies messaging (not requesting a redirect)
as endpoints outside the home network cannot be re-directed to communicate with another internal IP
address which is not exposed to the public internet.
Configuration
Configure the “OCS gateway” Cisco VCS(s)
Configuration of the “OCS gateway” Cisco VCSs is described in the main body of this document.
Configure OCS Director
Configuration of the “OCS Director” is described in the main body of this document.
Configure OCS with an Edge Server
1. Right click on the relevant Front End Pool.
2. Select Properties > Front End Properties.
3. Select the Federation tab.
4. Enter the FQDN and port number of the Edge Server.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 90 of 92