Manual

Enabling MOC clients registered on OCS to call endpoints registered on the video network
Set up one or more search rules to route calls with video network
domains to the video network
1. Go to the Rules page (VCS Configuration > Search rules > Rules)
2. Click New.
3. Configure the following fields:
Rule name
An appropriate name, for example “Route to Video network”
Zone name
Select the Video network zone, for example “To Video network”
4. Click Create rule.
5. Configure the Search Rule to match the domain supported in the video network:
Rule name
Leave as set above
Priority
Leave as default, for example 100
Source Any
Mode AliasPatternMatch
Pattern type Regex
Pattern string
Anything in the Video network domain,
for example .*@vcs.domain.*
Pattern behavior Leave
On successful match Continue
Target zone
Leave as set above
6. Click Save.
7. Repeat until there is a rule for each video network domain.
OCS configuration
No further configuration (beyond that carried out above) is required on OCS to allow calls from MOC
clients to endpoints registered on Cisco VCS Control.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 53 of 92