Manual

Enabling endpoints registered on the video network to call MOC clients registered on OCS
3. Configure the following fields:
Rule name To OCS
Zone name OCS
4. Click Create rule.
5. Configure the Search Rule so that all calls to URIs in the format .*@test-customer.com are
forwarded to OCS. (To handle presence messaging a .* is included at the end of the domain to
allow any parameters following the domain to be retained in the SIP messaging.)
Priority 100
Source Any
Mode AliasPatternMatch
Pattern type Regex
Pattern string
.*@test-customer\.com.*
Pattern behavior Leave
On successful match Stop
Target zone OCS
6. Click Save.
See the Zones and Neighbors section of the Cisco VCS Administrator Guide for further details.
Note: Never use a Mode of AnyAlias - always use a pattern string which matches the OCS
registrations as closely as possible so that only calls, notifies and other messages that are handled by
this zone get routed to this neighbor.
If AnyAlias were to be selected, then all calls and other messages would be routed to the OCS zone
— subject to no higher priority Search rules matching — whether or not OCS supports that call or
message.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 48 of 92