Manual

Enabling endpoints registered on the video network to call MOC clients registered on OCS
“OCS gateway” Cisco VCS Control configuration (2)
1. Configure the “OCS gateway” Cisco VCS with a neighbor zone that contains OCS.
2. Set up a Search rule to select what gets routed to the OCS zone.
3. If Hardware Load Balancers are used, set up neighbor zones to receive calls from OCS
Configure the “OCS gateway” Cisco VCS with a neighbor zone that
contains OCS
1. Go to the Zones page (VCS configuration > Zones).
2. Select New.
3. Configure the fields as follows:
Name
“OCS”
Type
Neighbor
4. Click Create Zone.
It is recommended that the “OCS gateway” Cisco VCS uses SIP over TLS to communicate with
OCS.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 46 of 92