Manual

Enabling endpoints registered on the video network to call MOC clients registered on OCS
4. Click Add or Edit (depending on whether a new entry is to be added, or a previous one modified).
5. For TLS (recommended) configure:
FQDN
FQDN of the “OCS gateway” cluster or FQDN of an “OCS
gateway” Cisco VCS, for example vcsocsgateway.test-
customer.com, or vcsocspeerX.test-customer.com
Outbound Only
Leave unselected
Throttle As Server
Select this check box
It reduces the message throttling as it knows the trusted device
is a server not a client
Treat As Authenticated
Select this check box
and click OK.
For TCP (not recommended) configure:
IP address
IP address of the “OCS gateway” Cisco VCS (or one peer of
the “OCS gateway” Cisco VCS cluster)
Outbound only
Leave unselected
Throttle as server
Select this check box
It reduces the message throttling as it knows the trusted device
is a server not a client
Treat As Authenticated
Select this check box
and click OK.
6. Repeat steps 4 and 5 for each “OCS gateway” Cisco VCS peer and, if configuring TLS, the FQDN
of the “OCS gateway” cluster.
7. Repeat steps 2 to 6 for all pools that can directly communicate to Cisco VCS.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 41 of 92