Manual

Enabling endpoints registered on the video network to call MOC clients registered on OCS
Set up the SIP domain of the “OCS gateway” Cisco VCS
OCS Relay FindMe™ users need to have the “OCS gateway” Cisco VCS handle the OCS’s domain.
1. Go to the Domains page (VCS Configuration > Protocols > SIP > Domains).
2. Click New.
3. Set Name to test-customer.com.
4. Click Create Domain.
Ensure that default links between the “OCS gateway” Cisco VCS Control’s
zones are set up
For a call to succeed there must be appropriate links between Zones, links must exist from:
 Default Subzone to Traversal Subzone
 Default Subzone to Default Zone
 Default Subzone to Cluster Subzone (this is required even if Cisco VCS is not part of a cluster)
 Traversal Subzone to Default Zone
Check these on the Links page (VCS Configuration > Bandwidth > Links):
If any links are missing, log onto the command line interface and run the command:
xcommand DefaultLinksAdd
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 30 of 92