Manual

Enabling calls between MOC clients registered on OCS
Enabling calls between MOC clients registered
on OCS
Cisco VCS Control configuration
No configuration is required on Cisco VCS Control for endpoints registered on OCS to call other
endpoints registered on OCS.
OCS configuration summary
To configure OCS to enable calls to be made between MOC clients that register to it:
1. Create new users (if required) using active directory
2. Edit user properties to allow MOC usage
3. Register MOC clients to OCS
Diagrams are taken for an OCS R2 installation – OCS R1 screenshots may be different.
Create new users in Active Directory
On the OCS server:
1. Select Active Directory Management.
2. Expand Active Directory Users and Computers.
3. Expand the relevant domain.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 19 of 92