Manual

Introduction
 SIP and H.323 video endpoints registered in the Video Network to MOC clients registered on
OCS.
 MOC clients registered on OCS to SIP and H.323 video endpoints registered in the Video
Network.
It also describes how to enable presence so that MOC clients can see the presence status of
endpoints registered in the video network.
The configuration process describes each of these stages separately, so that individual stages can be
implemented and tested before moving on to the next.
An advanced configuration stage (OCS Relay configuration of “OCS gateway” Cisco VCS) is also
documente
d for systems running Cisco VCS X5 or later and OCS R2 or later, which enables Cisco
VCS to register FindMe™ users as though they are MOC clients, so that:
 “In-call” as well as “Available” and “Off-line” can be seen for these FindMe™ users.
 OCS will fork calls to FindMe™ users at the same time as MOC users with the same name, so
that calls can be taken on MOC or a video endpoint, as desired.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2 Page 13 of 92