Leaflet
302: How do I change the output for my On Screen Display (OSD) from HDMI1 to another output
when the system is used with the TRCV remote control?
303: My C Series Codec does not seem to boot up (no video is displayed on the monitor), why?
318: My Pioneer plasma monitor does not display the image correctly from my codec. Why?
319: My monitor displays the image from my codec outside of the monitor frame, why?
326: The audio on the dual stream is out of sync with the dual stream video, why?
333: I installed a video camera to the video input number 2 on my C90 using component video,
now I am not able to get any video when I activate this source. Why?
528: Which resolutions do the video systems support at 60 fps?
609: My computer is connected to the DVI-I input of the EX90, but the desktop is not displayed
on the screen. Why?
Video
610: What resolutions does the EX90 support on the DVI-I PC-screen input?
611: Can I run MultiSite on EX and MX video systems?
630: I have the C40 DVI output congured as a second monitor, but when connecting to the DVI-I
output on the C40 codec, nothing is displayed on the screen, why?
631: When connecting to the second HDMI output on the Cisco TelePresence Codec C20, C40,
SX20 or EX90, nothing is displayed on the screen, why?
662: What should I do before contacting TAC?
667: My computer is connected to the DVI-I input, but the desktop is not displayed on the screen.
Why?
699: Can the SX80 DVI-I output support Composite or S-Video?
702: Which codecs support MultiWay(VCS)?
708: Which codec supports the H.265 protocol?
619: Can the MX and EX video systems be wall mounted?
643: The call is disconnected when I pick up the handset of the Touch 8 on my EX90 and EX60.
Why?
701: Which systems do not support H.323?
702: Which codecs support MultiWay(VCS)?
704: Which products support OneButtonToPush?
706: Are third party microphones supported when used with SX10?
Other
524: Are there any shortcuts on the TRCV remote control?
643: The call is disconnected when I pick up the handset of the Touch 8 on my EX90 and EX60.
Why?
668: Which TelePresence endpoints support the Touch 8, and which TelePresence Endpoints
have it as the standard user interface?
670: Do all of the Touch 8 controllers support the use of handset for audio?
673: Are there any requirements or limitations on the length of the Ethernet cable when
connecting the Touch 8 or Touch 10 to a codec?
674: What is the dierence between the Touch 8 controller for EX Series, SX20 and C Series?
675: Do the Touch 8 and Touch 10 controller's come in a wall mount version?
676: Can I connect more than one Touch 8 to a Cisco TelePresence video system?
677: Can I use both the Touch 8 and the remote control at the same time?
698: Can I connect more than one Touch 10 to a Cisco TelePresence video system?
709: Which TelePresence endpoints support the Touch 10, and which TelePresence Endpoints
have it as the standard user interface?
Touch controller and remote control
Cisco TelePresence TC Endpoints
D14865.03 TC Endpoints Knowledge Base Articles | APRIL 2015 Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
8
Knowledge Base Articles
Contents
Introduction
Questions
Contact
Questions and answers
Appendices
Questions and answers