Leaflet

706: Are third party microphones supported when used with SX10?

No, third party microphones are not supported when used with SX10.

Applies to the following products:

y SX10 Quick Set

707: Can I use both the HDMI and 3G-SDI output at the same time from the Precision 60

Camera?

Yes, both HDMI and 3G-SDI outputs are active at the same time from the camera.

Applies to the following products:

y Precision 60 Camera

708: Which codec supports the H.265 protocol?

H.265 is supported in SX10 Quick Set, MX700 and MX800 systems. However, it is only

supported in a point to point call.

Applies to the following products:

y SX80

y MX700

y MX800

709: Which TelePresence endpoints support the Touch 10, and which TelePresence Endpoints

have it as the standard user interface?

You can use the Touch 10 with all SX Series endpoints (SX10 Quick Set, SX20 Quick Set and

SX80), and all MX Series endpoints except MX200 and MX300(First generation), MX700 and

MX800 as well as MX200 G2 and MX300 G2 endpoints running TC software version TC7.x,

or later. The SX10 Quick Set and SX20 Quick Set need TC software version 7.2 or later, the

other products can use any software version valid to that specic product.

Applies to the following products:

y SX10 Quick Set

y SX20 Quick Set

y SX80

y MX200 G2

y MX300 G2

y MX700

y MX800

y Touch 10

Cisco TelePresence TC Endpoints

Knowledge Base Articles

Contents

Introduction

Questions

Contact

Questions and answers

Appendices

Questions and answers