Leaflet

692: Why can I hear my own voice in the speakers when I am using a Cisco TelePresence video
system?
If a microphone is connected to the Line 1 and Line 2 ports on the codec, its audio comes
out of the speakers. This is a normal behavior as it is designed to be used as an audio input
for presentations. This can be changed via TC console. The details are present in the TC
console User Guide.
Applies to the following products:
y SX80
y MX700
y MX800
y Codec C40
y Codec C60
y Codec C90
694: How do I setup a Cisco TelePresence video system so that I am not disturbed by incoming
calls when I am already in a call?
You can avoid getting incoming calls when you are already in a call by enabling the MultiSite
feature:
1. Enter the IP address of your codec on a web browser.
2. Select Congurations and Advanced Congurations.
3. Select Conference 1 from the menu on the left.
4. In the scroll down menu for IncomingMultisiteCall Mode select Deny.
This also applies to systems without MultiSite installed.
When enabling the MulitSite feature in TC7 The conguration is:
5. Select Congurations > System Conguration > Conference
Applies to the following products:
y SX20 Quick Set
y SX80
y Codec C20
y Codec C40
y Codec C60
y Codec C90
y MX200
y MX300
y MX200 G2
y MX300 G2
y MX700
y MX800
y EX60
y EX90
Cisco TelePresence TC Endpoints
D14865.03 TC Endpoints Knowledge Base Articles | APRIL 2015 Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
24
Knowledge Base Articles
Contents
Introduction
Questions
Contact
Questions and answers
Appendices
Questions and answers