Leaflet

611: Can I run MultiSite on EX and MX video systems?
MultiSite is available on EX90 and the MX Series, but is not available on EX60, MX200 and
MX300. On EX90 up to 3-sites can connect in MultiSite.
Applies to the following products:
y MX200
y MX300
y MX200 G2
y MX300 G2
y MX700
y MX800
y EX60
y EX90
Related questions:
329: Why can I only place point-to-point calls on my codec?
330: How do I install the MultiSite option key?
617: Which provisioning mode do the codes support?
The codecs currently support CUCM, VCS, Edge and TMS.
Applies to the following products:
y SX10 Quick Set
y SX20 Quick Set
y SX80
y Codec C20
y Codec C40
y Codec C60
y Codec C90
y MX200
y MX300
y MX200 G2
y MX300 G2
y MX700
y MX800
y EX60
y EX90
619: Can the MX and EX video systems be wall mounted?
The MX Series and the EX60 can be wall mounted. The brackets you need to do this have
to be ordered separately. The EX90 cannot be wall mounted
Applies to the following products:
y MX200
y MX300
y MX200 G2
y MX300 G2
y MX700
y MX800
y EX60
y EX90
620: Can I send content on the EX90 using HDMI 1 as input source?
Yes, the system auto-selects DVI or HDMI depending upon which is active - if both are active
you need to choose between these two.
1. Tap the More icon in the bottom left corner on the Touch controller main menu.
2.
Select Settings > Sources and and select the input you want. By selecting DVD as
source on the Touch controller interface, HDMI 1 is used as input source. Note that
the Source selector icon is only visible if both input sources are connected. If there
is only one source, the EX90 selects this source automatically.
Applies to the following products:
y EX90
622: Can I use the MX and EX systems as a USB hub?
No, this is not possible. The USB host and USB device connectors are for future use.
Applies to the following products:
y MX200
y MX300
y MX200 G2
y MX300 G2
y MX700
y MX800
y EX60
y EX90
Cisco TelePresence TC Endpoints
D14865.03 TC Endpoints Knowledge Base Articles | APRIL 2015 Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
19
Knowledge Base Articles
Contents
Introduction
Questions
Contact
Questions and answers
Appendices
Questions and answers