Leaflet
313: I changed the video output on my codec to a new resolution not supported by the monitor,
how do I revert this?
Conguring the OSD output using the TRC V remote control
You can use a special sequence on the remote control.
Use the remote control to enter the following sequence: 'Disconnect-key * # * # 0 X #'
where X = the video output where you want to display the OSD.
y X = 1 for HDMI 1
y X = 2 for DVI 2 (HDMI 2 for C20)
y X = 3 for HDMI 3
y X = 4 for DVI 4
In addition to change the OSD output it also resets the output to default resolution, which is
XGA for DVI and 720p for HDMI.
Conguring the OSD output using an API command
You can use an API command to set the OSD output to the relevant video output.
Log in as Admin using SSH (secure shell) and execute the command:
xConguration Video OSD Output: <1-4>
Applies to the following products:
y SX10 Quick Set
y SX20 Quick Set
y SX80
y Codec C20
y Codec C40
y Codec C60
y Codec C90
Related questions:
302: How do I change the output for my On Screen Display (OSD) from HDMI1 to another
output when the system is used with the TRCV remote control?
315: How do I place a call from the GUI on the video system without changing the default dial
protocol?
In the Call menu, enter sip: or h323 before the URI/H323 ID, for example: sip:name@
company.com
To see the default dial protocol options, open the Home menu and go to Settings > Administrator
settings > Advanced conguration > Conference 1 > DefaultCall > Protocol.
On the Touch controller, enter More > settings menu and go to Administrator settings >
Call Settings.
Applies to the following products:
y SX10 Quick Set
y SX20 Quick Set
y SX80
y Codec C20
y Codec C40
y Codec C60
y Codec C90
y MX200
y MX300
y MX200 G2
y MX300 G2
y MX700
y MX800
y EX60
y EX90
318: My Pioneer plasma monitor does not display the image correctly from my codec. Why?
Some of the Pioneer monitors must be set to PC mode to display the image correctly. Consult
the Pioneer monitors user manual for further information.
Applies to the following products:
y SX10 Quick Set
y SX20 Quick Set
y SX80
y Codec C20
y Codec C40
y Codec C60
y Codec C90
y EX60
y EX90
Cisco TelePresence TC Endpoints
D14865.03 TC Endpoints Knowledge Base Articles | APRIL 2015 Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
12
Knowledge Base Articles
Contents
Introduction
Questions
Contact
Questions and answers
Appendices
Questions and answers