Leaflet

Manual registration of the endpoint
(continued...)
Adding a new device
(continued...)
Dial Plan
Navigate to the Product Specific Configuration Layout > Dial Plan section,
and configure the items accordingly to your preferred settings.
8. Configure the dial plan.
Refer to Cisco TelePresence Manager documentation for more details.
Directory Number
Navigate to the Product Specific Configuration Layout > Directory Number
section, and configure the items accordingly to your preferred settings.
9. Configure the directory number.
Refer to Cisco TelePresence Manager documentation for more details.
When done, click Save and Apply Config.
Cisco TelePresence Manager documentation
The Cisco TelePresence Manager documentation is found on the
Cisco web site. Go to:http://www.cisco.com/en/US/products/
ps7074/tsd_products_support_series_home.html
How to configure the dial plan and directory number for the endpoint.
Log in to Cisco Unified CM Administration and navigate to Device > Phone.
Device
Phone
8
9
Cisco TelePresence Endpoints running TC6 and Cisco Unified Communications Manager 9.0 Quick Reference Guide
D14996.01 Administering TC6 Endpoints on CUCM 9.0, January 2013. www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
22
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
CUCM configuration