Leaflet

Device
Phone
Manual registration of the endpoint
(continued...)
Adding a new device
(continued...)
Admin Username and Password
7. Navigate to the Product Specific Configuration Layout > Admin username
and password section, and configure the items accordingly to your
preferred settings.
Admin username and password: Configure the username and password,
which must match the values set on the endpoint.
Admin Username: Enter the username for the admin user.
Default:admin
Maximum length: 64
Allowed values: Admin username cannot be one of the following:
apache, daemon, nobody, root, shutdown. It must be between 1
and 64 characters long.
Admin Password: Enter the password for the admin user.
Default: “”
Maximum length: 64
Allowed values: Admin password can only contain printable
characters from the ASCII character set, except a white space.
Click Save and Apply Config.
NOTE: The admin username and password will not be pushed to the
endpoint, it must be set on both sides. The admin username and password
set on CUCM must match the system password set on the endpoint in order
for the Cisco TelePresence Manager (CTS-MAN) to discover the endpoint
and provide One Button to Push scheduling to them.
• Refer to "Setting the system password" on page 13.
• The Cisco Unified CM user documentation:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_
products_support_series_home.html
How to set the username and password for the endpoint.
Log in to Cisco Unified CM Administration and navigate to Device > Phone.
7
Cisco TelePresence Endpoints running TC6 and Cisco Unified Communications Manager 9.0 Quick Reference Guide
D14996.01 Administering TC6 Endpoints on CUCM 9.0, January 2013. www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
21
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
CUCM configuration