Leaflet

Cisco TelePresence Endpoints running TC6 and Cisco Unified Communications Manager 9.0 Quick Reference Guide

API WEB

Setting the system password

The system password will restrict access to the codec.

The endpoint is delivered with a default user account with

full credentials. The user name is admin, and initially, no

password is set for the default user.

Make sure to keep a copy of the password in a safe place.

We strongly recommend that you set a password

for the admin user, and to any other user with

similar credentials, to restrict access to system

configuration.

NOTE: The system password set on the endpoint must

match the value set in the Cisco Unified CM in order for the

Cisco TelePresence Manager (CTS-MAN) to discover the

endpoint and provide One Button to Push scheduling to it.

Refer to "Admin Username and Password" on page 21.

Setting the system password

username and current password. If a password is currently

not set, use a blank password when logging on.

Set or change the system password

1. Click on your username in the upper right corner and

choose Change password in the drop down menu.

2. Enter the Current password, the New password, and

repeat the new password in the appropriate input fields.

The password format is a string with 0–64 characters.

3. Click Change password.

Setting the system password

with your username and current password. If a password is

currently not set, use a blank password when logging on.

Set or change the system password

xCommand SystemUnit AdminPassword Set

Password: ***********

The password format is a string with 0–64 characters.

When the system password is set from the command

line interface the codec must be restarted to make

the password apply to the web interface.

Contents

Introduction

Endpoint configuration

CUCM configuration

Setting passwords

Appendices

Endpoint configuration