Leaflet

Cisco TelePresence Endpoints running TC6 and Cisco Unified Communications Manager 9.0 Quick Reference Guide
D14996.01 Administering TC6 Endpoints on CUCM 9.0, January 2013. www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
10
Setting up provisioning (continued...)
About the External Manager address
If the network does not offer DHCP Option 150, the External
Manager Address must be added manually. Note that any
input in the field will override the setting provided by DHCP.
When the infrastructure is set to Cisco UCM; then CDP (Cisco
Discovery Protocol) will be enabled and if CDP is successful,
the endpoint will discover DHCP Option 150. In this case you
can leave the External Manager Address field blank, as the
DHCP server will provide the address automatically.
Setting up provisioning
When logged on to the endpoint through the command line
interface, run the following commands:
Configure the provisioning
xConfiguration Provisioning Mode:
[must be CUCM]
xConfiguration Provisioning ExternalManager
Ad d ress: [CUCM cluster TFTP server address]
xConfiguration Provisioning ExternalManager
Protocol: [must be HTTP for UCM mode]
xConfiguration Provisioning LoginName:
[leave blank, it is not needed for UCM mode]
xConfiguration Provisioning Password:
[leave blank, it is not needed for UCM mode]
xConfiguration Provisioning HttpMethod:
[both GET and POST work in UCM mode]
xConfiguration Provisioning ExternalManager
Path: [leave blank, it is not needed for UCM mode]
xConfiguration Provisioning ExternalManager
Domain: [leave blank, it is not needed for UCM mode]
API WEB
Setting up provisioning
When logged on to the endpoint through the web interface,
go to the Configuration tab and choose Advanced
Configuration, then choose Provisioning from the left sidebar.
Configure the provisioning
1. Go to Provisioning section and set Mode to CUCM. Click
ok to save the changes.
2. Go to the ExternalManager section and the IP address
or DNS name of the External Manager of the Cisco UCM
cluster TFTP server in the Extermal Manager input field.
Click ok to save the changes.
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
Endpoint configuration