Release Notes

Interoperability
Cisco TelePresence Server Software Release Notes 3.1(1.95) Page 23 of 31
Endpoint Software Comments
Cisco TelePresence System TX1300 47,
Cisco TelePresence System TX9000
TX6.0.3 Tested TIP:
n Orange or green flashes can be seen on the
display of these endpoints in 1080p30/720p60
calls. (Issue identifier CSCui78297)
n You cannot disconnect audio add-in
participants via the participant list on the touch
panel. (Issue identifier CSCuj50089)
Tested CUCM to VCS H.323 interworking:
n Interworking calls from this endpoint is not
recommended
We recommend that you use TX software 6.0.5,
or later, with TelePresence Server software 3.1
(1.95).
Cisco TelePresence System TX1300
Series, Cisco TelePresence System
TX9000 Series
TX6.0.5 Tested TIP:
n You cannot disconnect audio add-in
participants via the participant list on the touch
panel. (Issue identifier CSCuj50089)
Tested CUCM to VCS H.323 interworking:
n Interworking calls from this endpoint is not
recommended
T3 TelePresence, T1 TelePresence TC6.0.1 Tested version TC6.0.1/TCU4.2.1 in remotely
managed mode.
Tested H.323:
n PIN entry and layout changing will not function
as the T1 and T3 do not support DTMF/ FECC
to theTelePresence Server
n Note that some T1 and T3 functionality is not
supported when the TS operates in Remotely
Managed mode
n T3 systems will prefer 1600x1200 resolution
when XGAp60 should be shown
Tested H.323 to SIP interworking:
n No issues found
Cisco
Endpoint Software Comments
Cisco Desktop Collaboration Experience
DX650
10-0-1-
110
Tested CUCM to VCS/Conductor SIP and CUCM to
VCS H.323 interworking:
n No issues found
Cisco Unified IP Phone [phone]
SR1
Tested CUCM to VCS/Conductor SIP and CUCM to
VCS H.323 interworking:
n Video calls connect as audio-only if call bandwidth
is below 280 kbps