Release Notes

c. Right-click the TelePresence Server virtual machine and select Edit Settings…
d. On the Hardware tab, click CPUs
e. From the Number of cores per socket list, select the required number of virtual CPUs (vCPUs)
Note: 16 vCPUs should map to 16 physical CPUs since oversubscription is not supported.
f. Click OK
g. Right-click the TelePresence Server virtual machine and select Power > Power On
3. You should also change the memory allocation from 16 GB to 8 GB as follows:
a. Open your VMware client and access the ESXi host
b. Right-click the TelePresence Server virtual machine and select Power > Power Off
c. Right-click the TelePresence Server virtual machine and select Edit Settings…
d. On the Hardware tab, click Memory
e. In the Memory Size field, select the required amount of memory; the minimum requirement is 8 GB
Note: 8 GB vRAM should map to 8 GB physical RAM since oversubscription is not supported.
f. Click OK
g. Right-click the TelePresence Server virtual machine and select Power > Power On
Cisco TelePresence Server Software Release Notes (4.0(2.8)) Page 32 of 36
Upgrading to 4.0(2.8)