Release Notes

New features introduced in 4.0(1.57)
Cisco TelePresence Server Software Release Notes (4.0(2.8)) Page 12 of 36
optimizationProfile
value
Description
maximizeExperience
Screen licenses are more readily allocated. This value gives the best experience of
the four profiles.
If you disable the optimization by bandwidth (by setting optimizationProfile to
capabilitySetOnly), calls will be capable of higher resolutions at lower bandwidths
but the inefficency in allocation could well outweigh the benefit.
capabilitySetOnly
This is the behavior of TelePresence Server 3.1.
The TelePresence Server only considers the endpoint's maximum advertized
resolution when reporting its screen license requirement to the managing system; it
does not attempt to report resources based on the endpoint's advertized receive
bandwidth.
Table 5: Optimization profiles enumerated type (continued)
The following diagram illustrates how the TelePresence Server will report requirements for the different
optimization profiles and the different bandwidths. The diagram assumes that the conference's Participant
quality is set to the maximum possible (1080p30 or 720p60). There are two horizontal bars for each profile,
representing two of Conductor's possible Content quality limits. The upper bar represents the maximum
Content quality (1080p30) and the lower represents a more commonly used Content quality (720p5).
Figure 8: Screen license requirements by advertized receive bandwidth, for different optimization profiles and
content quality
Figure 9: Key to the previous chart