Manual

Audio Console

Add a new

output...

...which will

appear here

Add new modules or rename existing?

If you are going to reconfigure the current system rather

than expanding it to add functionality, there is no need

to add new output modules. You may then just as well

rename an existing one and use that as your new module.

To change the name of an existing output module, just

double-click on its name (for nameless modules double-

click where the name will appear when modules have

names).

Adding an output module

To create a new output click New Output. A new output

will appear at the bottom, as shown. Give the new

local output a name and click the arrow to expand the

Settings field. To name a module later, double-click the

name field.

As for the input modules, there are two sets of settings

available; Global Settings for the group and Individual

Settings for this particular module. All these options are

treated on the next page.

To delete this output module, click on the

ADDING AN OUTPUT MODULE

Adding or reassigning output modules

Assign physical outputs to the module

The individual settings available for an output module

depends on which physical output socket(s) you assign

to it. Read more about this on page 26.

Consequently, we recommend that you assign (or

reassign) physical output sockets to the module before

you alter the settings. For a description on how to do

this, see page 25.

The Settings

The Global settings for an output module are:

• Loudspeaker, which can be set to either On or Off.

• Channels, which can be either 1 (mono) or 2 (stereo).

The Individual settings depend on the physical output

sockets you assign to the module. See page 26 for