Manual

Audio Console

ADDING AN INPUT MODULE

Adding or reassigning input modules

...the new input

will appear here

Click the arrow

next to the

Settings to

expand the menu

Add a new input...

Add new modules or rename existing?

If you are going to reconfigure the current system rather

than expanding it to add functionality, there is no need to

add new input modules. You may then just as well rename

an existing one and use that as your new module.

To change the name of an existing input module, just

double-click on its name (for nameless modules double-

click where the name will appear when modules have

names).

Adding an input module

To create a new input module click New Input. A new

input will appear at the bottom, as shown. Give the new

local input a name and click the arrow to expand the

Settings field. To name a module later, double-click the

name field.

The settings are similar to those outlined in Global

Settings on page page 26. Set as required.

The next thing to do will be to specify from which

physical input this input shall get its signal. This is

described on page 25.

To delete this input module, click on the

Introduction

Contents

Video compositor

Sources of inspiration