Manual

Video compositor

A QUICK LOOK AT THE TOOLBOX

Video compositor

The editing tools available

By now you should have figured out where you are

heading, which means that you should have a clear idea

of the number of frames to be used for each scenario.

The maximum number of frames is listed in the table.

Adding a frame. If you go for a layout consisting of 2, 3

or 4 frames and later find that you need another frame,

you will typically use the New frame button.

Deleting a frame. If you find that there are too many

frames on the stage, click in the frame and then click

to delete a frame.

The frames provided with any of the presets can be

rearranged, repositioned and resized to the extent you

want. This means that you may use any of the presets

as a basis for your layout composition without having to

involve the New frame function.

Note! If you select any of the presets available, all

frames will become unpopulated. How to populate

frames is shown on page 17.

Select among

presets

Add a new frame

to the layout.

Move a frame

freely or

snap to grid

Use smart

guides to ease

alignment and

spacing

Advanced

settings to

specify exact

position & size

If it shall be possible to invoke self-view (Local setup) you must leave at least one frame unused.

Otherwise there will be no resources available for the self-view.

Codec Max # frames in Local Max # frames in Remote Max # frames in Presentation (second stream)

C90 5 4 4

C60 5 4 1

Introduction

Contents

Sources of inspiration

Audio Console