Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
48
Cisco TelePresence MX700 Spare Parts Replacement Guide
Replace monitor (wall mounted) (page 6 of 9)
Step 8: Unscrew monitor screws and security bracket, and
disconnect power cable
65 kg / 144 lb
Unscrew the four M6x35 screws
(countersunk), in front at each side.
Use an Allen key, 4 mm
Unscrew the two M6x90 screws
(countersunk), from underneath at
each side.
Use an Allen key, 4 mm
Unscrew the M6x100 screws (pan),
from underneath as illustrated, and
remove the two security brackets.
Use an Allen key, 4 mm
8a
8b
8c
Secure the monitor
We recommend three people working
together to replace the monitor. Two
people must hold the monitor.
Disconnect the power cable
between the two monitors.
8d
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Codec and monitors