Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
45
Cisco TelePresence MX700 Spare Parts Replacement Guide
Replace monitor (wall mounted) (page 3 of 9)
Step 5: Install support handles
First remove the support handles from your
replacement monitor as illustrated.
Then mount the handles on the monitor you
want to replace.
This is neccessary in order to safely lift the
monitor.
Unscrew the screws (4 × M4x8,
two on each handle) and remove
the two support handles from the
replacement monitor.
Unscrew the screws (2 × M4x8, one
on each bracket) and remove the
brackets that the support handles
were fastened to.
5a 5b
Mount the brackets and handles on
the monitor you want to replace.
5c
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Codec and monitors