Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
40
Cisco TelePresence MX700 Spare Parts Replacement Guide
Replace monitor (mounted on a stand) (page 5 of 7)
Step 7: Unscrew monitor screws and security brackets, and
disconnect power cable
Disconnect the power
cable between the two
monitors.
65
kg / 144 lb
Unscrew the four M6x35 screws
(countersunk), in front at each side.
Use an Allen key, 4 mm
Unscrew the two M6x90 screws
(countersunk), from underneath at each side.
Use an Allen key, 4 mm
Unscrew the M6x100 screws (pan), from
underneath as illustrated, and remove the two
security brackets.
Use an Allen key, 4 mm
7a
7b
7c
Secure the monitor
We recommend three people working together to
replace the monitor. Two people must hold the monitor.
7d
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Codec and monitors