Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
4
Cisco TelePresence MX700 Spare Parts Replacement Guide
About this guide
This guide describes how to replace spare parts for
MX700.
The guide describes the steps required to remove
the parts. In order to install the replacement part, you
should follow the same steps in reverse order.
In addition to this Replacement guide, the following
documents are particularly useful when replacing parts.
• Cable schema
• Spare part list
• Installation guide(s)
These documents are available at the Cisco web site.
Go to http://www.cisco.com/go/mx-docs and select
Maintain and Operate Guides or Install and Upgrade
Guides.
Ordering information
To place an order, please contact your local Cisco
representative or Cisco partner and refer to part
numbers as listed in this document.
Note that you cannot upgrade a single camera system
to a dual camera system by ordering spare parts; you
must order a complete system.
Cisco service and support
Cisco and our partners provide a broad portfolio
of smart, personalized services and support. For
more information about these services, go to:
http://www.cisco.com/go/telepresenceservices
Products covered in this guide:
• Cisco TelePresence MX700
MX700 comes with two camera versions:
Single camera and Dual camera.
For both versions, there are three mounting
options: free standing floor stand, floor stand
secured to the wall, and wall mount.
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Introduction