Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
35
Cisco TelePresence MX700 Spare Parts Replacement Guide
Replace PoE injector (page 2 of 2)
Step 2: Remove PoE injector
Disconnect cables:
1 × Power (top)
2 × RJ45 (bottom),
Ethernet and Touch 10
user interface.
Remove PoE injector.Unscrew and remove
screws and washers.
2 × M3x8 (pan),
Torx T10
Re-assembly:
In order to install the new PoE injector, follow all the steps in reverse order.
2a 2b 2c
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Codec and monitors