Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
23
Cisco TelePresence MX700 Spare Parts Replacement Guide
Replace dual camera module (page 2 of 7)
Step 2: Remove loudspeakers from positions 3, 4 and 5 above
left monitor and positions 1 and 2 above right monitor
This procedure is shown for loudspeaker 4 above the left monitor. Repeat
the procedure for loudspeaker 3 and 5 above the left monitor, and 1 and 2
above the right monitor.
When reconnecting a loudspeaker, make sure to connect the
correct cable. The cables are marked with the loudspeaker’s
position. Loudspeaker cable 4 above the right monitor is not used.
Loudspeaker
positions
1
2
3
4
5
1
2
3
5
Unscrew camera screw.
PT4x10, Torx T20
Pull loudspeaker 10-15 cm (4-6 inch) out. Unplug the cable from the connector on
the back of the loudspeaker.
2a 2b 2c
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Speakers and cameras