Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
17
Cisco TelePresence MX700 Spare Parts Replacement Guide
Replace single camera module (page 2 of 6)
Step 2: Remove loudspeakers from position 5 (above left monitor)
and positions 1 and 2 (above right monitor)
This procedure is shown for the loudspeaker in position 5 above the left monitor.
Repeat the procedure for loudspeaker 1 and 2 above the right monitor.
When reconnecting the loudspeakers, make sure to connect the correct
cable. The cables are marked with the loudspeaker’s position.
1
5
2
3
4
1
5
2
3
4
Loudspeaker
positions
Unscrew camera screw.
PT4x10, Torx T20
Pull loudspeaker 10-15 cm (4-6 inch) out. Unplug the cable from the connector on
the back of the loudspeaker.
2a 2b 2c
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Speakers and cameras