Maintenance Manual

D15324.03 MX700 Spare Parts Replacement Guide, JULY 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
12
Cisco TelePresence MX700 Spare Parts Replacement Guide
The center back cover is fastened with magnets and two
guidance pins.
Tilt the back cover out at the bottom, and slide it upward.
Replace center top profile, camera cover and center back cover (page 3 of 3)
Step 3: Remove the center back cover
Re-assembly:
In order to replace the covers, follow the steps in
reversed order.
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitors
Appendix
Grilles and covers