Maintenance Manual

Redial
behavior
Defines whether and how the MCU
will redial this endpoint if the
connection fails:
■ <use box-wide setting>
This preconfigured participant
inherits the redial behavior
setting that the MCU uses by
default for all preconfigured
participants. This option is not
available when you are
configuring ad hoc
participants.
■ Never redial
The MCU never attempts to
redial a failed connection to
this participant.
■ Redial until connected
The MCU redials this
participant if it fails
unexpectedly when first
establishing a connection; the
MCU never retries the
connection if it fails after being
established.
■ Redial on unexpected
disconnection
The MCU redials this
participant on any unexpected
disconnection, whether it
occurs while first being
established or at any point
thereafter. It does not attempt
to redial if the participant
deliberately ends the
connection.
Note: A deliberate
disconnection, if it is not
correctly signaled by the
endpoint, may be interpreted
as unexpected. If you
experience this, reduce the
call persistence behavior for
the affected endpoint.
■ Redial on any disconnection
The MCU redials this
preconfigured participant
when the connection closes,
irrespective of whether the call
fails or is deliberately ended by
the participant.
This setting defines redial behavior for an individual
participant, which overrides the box-wide setting.
98
Cisco TelePresence MCU Series Online Printable Help