Maintenance Manual

Specific to

this auto

attendant

The custom banner identified for

this auto attendant. Click

Remove banner to remove this

graphic as the banner. Click

Update after uploading a new

graphic.

Nothing displays here until you upload the custom graphic as

described below.

Banner upload

Banner for

this auto

attendant

The custom graphic to be used

for a banner. Click Browse to

locate the file on your hard drive.

For the MCU 4500 Series and the MCU MSE 8510 the image file

can be a JPEG, GIF or Windows BMP format with a maximum

size of 1600 x 1200 pixels. If the file is smaller than this size, the

MCU will scale it to fill the banner area previously occupied by

the Cisco logo. Click Upload new file to display.

On the MCU 4200 Series the image file can be a JPEG, GIF or

Windows BMP format with a maximum size of 352 x 64 pixels.

(This size will fill the auto attendant’s banner area, if it is smaller

a border appears around the banner and if it is larger, it will be

cropped.) Click Upload new file to display.

Note: There is a 90KB file size restriction on all platforms.

Background

color

Sets a custom background color

that is used if the banner is

smaller than 352 x 64 pixels..

Enter the color values in each

field. Click Upload new file to

display.

This field only applies to the MCU 4200 Series.